There are 15 main parts in a double roller crusher of Great Wall Heavy Industry Company , this article is talking about the first 5. 1. Fixed Roller In order to ensure the discharging size, this roller is set to be a fixed roller, usually this roller stands firmly, then it will not only ensures the machine performance, but also ensures the discharging size.
Although its brief period of popularity passed some thirty odd years since, and only a few sets were installed before interest reverted to other types, the high speed double roll crusher developed by Thomas A. Edison shortly before the end of the last century
Jun 30, 2019· Toothed Roller Crusher Introduction. Toothed roller crusher or teethed roller crusher is one kind of roller crusher playing a primary, secondary and tertiary role in crushing. It is actually simple in structure with relatively rotating rollers. There are sharp teeth on them, which are the main part of toothed roller crusher
The double roll crusher can be applied in industrial sectors, such as cement industry, chemical industry and building materials industry for medium and fine crushing of material with medium and high hardness like limestone, coke, coal, etc. Double roll crusher features a two roll structure
Double toothed roller crusher structure The double toothed roller crusher is mainly composed of main and auxiliary transmission gear boxes, casing, machine base, crushing tooth roller, gas liquid buffer cylinder and motor. The main and auxiliary transmission gearboxes are rigidly connected to the upper and lower section crushers via the ...
The tooth roller crusher is also known as double tooth roller crusher. The tooth roller crusher is mainly used for coal crushing in thermal power plants, thermal power companies and coal yards. The 3 5 mm crushed coal is used for circulating fluidized
The Influence of the Structure of Double Toothed Roller Crusher on the Crushing Effect based on EDEM Kangkang Sun 1 , Ruoding Ma 2* , Guang Li 3 , Da Cui 1 , Yanpeng Lu 1
The best test scheme and the order of three influencing factors are obtained, which provides the basis for the design of the double toothed roller crusher. Uniaxial compression model Figure 4.
Roller crusher works with the principle of low speed and high pressure for roller extrusion. In the process of production, the toothed roller crusher can enter into the v type crushing chamber of the two rolls, which will collide with the high speed rotating toothed roller, thus achieving the purpose of material crushing. Product Structure
The crusher adopts tooth plate structure and bolteddesign, which can be replaced separately, and is convenient for inspection and maintenance; B. Crusher roll diameter selection and tooth profile targeted design to ensure that large pieces of material are embedded and crushed at one time.
June 10, 2020
Copyright © 2020.Company name All rights reserved.